After setting up the Netgear WiFi range extender, you can relocate it to a new location in the home and begin enjoying its WiFi on various devices in the home. Are you unable to detect its network name Netgear_ext SSID on your device? You won’t be able to access your extender’s WiFi this way. We hope you have configured your device correctly, because if you have missed any step or performed any step incorrectly, then you can’t access its network. How to fix this issue? Find the solutions in this article.
Netgear Extender SSID Not Visible[Causes, Solutions]
WiFi is Disabled
If the WiFi settings on your computer or laptop or mobile(mobilekingindly phone repairing service indiana) are disabled then you won’t be able to view the network name of your Netgear extender. We recommend you check the WiFi settings first. Use the WiFi key on the keyboard if your PC has this option. Else, go to Open Network and Sharing Center and enable the WiFi from here. In case it is your phone that is not finding the network name, then go to its settings and toggle the WiFi option in it. Once you have enabled WiFi on your device, the issue should be resolved. If it doesn’t then try the next step.
Device Not Broadcasting SSID
Now, there is a possibility that your Netgear extender is not broadcasting the network name. You can verify this by accessing its settings. Do this:
-
Visit mywifiext.net using an internet browser on your PC.
-
Log in to the extender using admin login credentials.
-
Go to WiFi settings and check if Enable 2.4GHz WiFi, Enable 5GHz WiFi or Broadcast this Network Name(SSID) is checked or not. In case they are not checked, check them now to enable them.
-
Click on the Save option to save the changes.
WiFi Interference is the Culprit
If your Netgear WiFi extender is sharing its location with other networking devices or some home appliances, then you need to move your extender to a new location in the home. This is because if devices that operate on similar frequency are placed near each other, then WiFi interference is caused. This degrades the Netgear extender performance. We suggest you move the Netgear WiFi extender away from any other networking device or home appliances. Also, keep it away from reflexive surfaces, metallic objects and heavy water bodies.
Internet is Not Good
The internet service from your ISP plays an important role in deciding the quality of WIFi you receive from the Netgear WiFi extender. You need to check with your ISP if there is an internet outage from his end. Give him some time to get the issue fixed if any.
Apart from this, you need to check if the extender and router are connected properly. A loose connection between the networking devices is also a factor that can make you experience the issue that you are currently facing. You need to check the Ethernet cable that you have used to connect the devices. It should be free of cuts and should be inserted tightly into both devices. However, if you have connected the router to the extender wirelessly, then the distance between both devices should not be more. Once you are sure that the internet connection to the extender is stable, check if you are able to access its SSID or not.
Technical Glitches Stopped the Process
If any of the troubleshooting hacks haven’t worked so far, then try rebooting your Netgear WiFi extender now. This will help in fixing the technical glitches with the device. Technical glitches can be a prominent reason that can cause minor to major issues with the technical devices. Rebooting works wonders in fixing technical glitches. Without even thinking much about it, reboot your Netgear extender right away. Power off your device and unplug it from the wall socket. After about a couple of minutes, again connect the extender to the wall socket and turn on the power supply. Soon the extender will be up and running normally.
Sum Up
To sum it all up, we would say that after the Netgear WiFi extender is booted up completely, you can try accessing its network using its SSID. In the event, you still fail in doing this, access the Netgear extender login page and update its firmware to the latest version. This is definitely going to help you out.
