Is the LED on your Nighthawk router blinking white? Are you wondering what would have forced the LED to do so? Well, it is a corrupted firmware. Regardless of the reason that has caused the issue at hand, the Netgear router troubleshooting lights hacks mentioned in this article will help you to resolve it in a hassle-free manner. Thus, get down to reading.
[Fixed] Nighthawk Router Blinking White Light Issue
- Restart the Netgear Router
Rebooting or restarting the Netgear wireless router is the very thing that we suggest to users whenever they face issues with their routers. We would like to recommend you the same thing. See if restarting the device helps you out. If it does, leave a few words of appreciation in the comment section. On the off chance, it does not; make your way to the following troubleshooting hack. We are being hopeful that it will help you out.
- Check the Internet Connection
A weak internet connection is another common reason why you are experiencing the Netgear router blinking white light issue. In this case, you need to check the connection between the router and the modem. If it is unstable, change the Ethernet cable holding the connection between them. And in case, the culprit is not in your house, then contact your Internet Service Provider. He might be able to help you out.
- Update the Firmware Again
Considering you are walking through this troubleshooting hack, it means that your Internet Service Provider was not of any assistance to you. But, worry not because we do have a couple of hacks through which the issue at hand can be dealt with. As of now, take our advice and try to update the firmware of your Netgear wireless router again. For your information, whether you use the manual method or the Nighthawk application, you need to have the Netgear router login credentials by your side.
- Download the Correct Version
The firmware of your Netgear router could have also gotten corrupted because you ended up downloading the wrong firmware version, the one which is not compatible with your networking device. In this case, the solution is pretty simple; you need to download the correct firmware version. Make sure that you enter the correct model number. If you want to be sure about it, refer to the user manual of your router or refer to its label.
- Avoid Background Activities
Sometimes, when the firmware is in the process of getting downloaded and one performs activities on the system, i.e. the computer or laptop, the firmware gets corrupted. This brings us to the next reason that might have led you to the Netgear router blinking white light issue. To troubleshoot it, avoid performing any background activities while upgrading the firmware of your networking device the next time.
- Reset the Nighthawk Router
Are you still unable to troubleshoot the Netgear router blinking white light issue despite following all the hacks given above? Well, it looks like the issue is much bigger than we anticipated. In this case, you are left with no other option than to reset your networking device. Resetting your router requires you to restore its default factory settings. Now, you might be thinking about how to reset Nighthawk router, isn’t it? Well, you will find the instructions regarding the same in the user manual of your router.
Final Words
Coming across the Netgear router blinking white light issue can become a piece of cake if you forget to be careful while updating the firmware of your networking device. We really hope that after following the troubleshooting hacks mentioned above, you will be able to change the status of the LED on your networking device with ease. On the off chance, you are still not able to, this means that there is something wrong with your router itself. For this, you need to get your router checked and if needs a replacement, then do as required.
What do you think of this article? Was it worth a read? Whether the answer is a yes or no, do share it with your fellow readers. You can do this by making use of the comment section. Thus, do as needed without wasting any more time.
