Netgear repeaters are winning the hearts of netizens due to their unprecedented WiFi performance. After all, they do the job of amplifying the wireless signals emitted by the home router and filling every corner of the house with a lightning-fast WiFi connection. Just in case, you are also planning to get your hands on a Netgear repeater, then you’ve made a wonderful decision. But, purchasing the repeater will not complete the task. You need to perform a Netgear repeater setup to achieve the signal amplification goal.
With that said, we’ve prepared a step-by-step guide using which you will not only be able to get your WiFi repeater up and running but will also gain knowledge on how to improve its performance. So, let’s start the Netgear repeater setup guide.
But, before commencing the installation, we want you to gain access to an upgraded version of the web browser if you want to keep the mywifiext.net not working issue at bay. FYI, mywifiext.net is the default web URL of the Netgear repeater that one must access to set up the device.
How to Set Up a Netgear Repeater?
-
Switch on your WiFi repeater. Be sure that you connect it to a working wall socket.
-
Thereafter, power up your host router and ensure that the lights on it are stable.
-
Get access to a network cable [RJ45 will be the best].
-
Now, you are supposed to create a wired connection between your router and repeater.
-
Once done, switch on your computer and load a browser.
-
It should fulfill the requirement that we’ve mentioned before starting the setup process.
-
Make your way to the address box.
-
Type the default web URL i.e. mywifiext.net there and hit the Enter key.
-
You will see the admin portal of your Netgear repeater.
-
In some cases, you will see the New Extender Setup button which if clicked takes you to the repeater login window.
-
Now, input the default values of the repeater’s admin password and username.
-
With that, you will see the Netgear repeater setup wizard.
-
You have to select the network you wish to extend.
-
After that, do what the screen suggests.
This is how you can complete the setup process of your Netgear wireless repeater. Once done, you are free to access the extended network on your devices. But, the setup process will complete when you take the repeater to a new location so that the dead zones of the house can be brought to life.
Fix: Netgear Repeater Setup Issues
Although after following the above-mentioned instructions, there are least chances of getting failure with respect to the setup process of your repeater still we’ve mentioned a few tips that will help you keep issues away:
-
Always place the Netgear repeater close to the main router for the setup process. However, do not place them neck to neck as it can result in a clash of their WiFi signals.
-
The Ethernet cable used for connecting your networking devices must be intact. Plus, it is supposed to firmly link to your WiFi devices.
-
You should not use the search bar of the web browser to access the repeater’s default URL since it will lead you to anonymous results that have nothing to do with the setup process.
-
If you are unable to complete the setup process using one web browser then you can try your hands on another one. The setup issues also arise due to browser incompatibility.
-
Do not make the mistake of using the incorrect admin password and username to log in to the repeater. In case you are not familiar with them, check out the repeater’s user manual.
After taking care of the aforementioned points, you will be able to complete the repeater setup process with ease. But, know that you cannot use mywifiext.net on iOS or Mac. Use mywifiext.local instead. Otherwise, you will come across the mywifiext.net refused to connect error message. However, for now, we would like to shift your focus to improving the WiFi performance of your repeater. Well, it can be done by upgrading the firmware. Check out the next section to learn about the firmware update process.
How to Update Netgear Repeater Firmware?
-
First of all, switch on your wireless repeater and make appropriate connections.
-
Using a web browser, visit mywifiext.net or mywifiext.local.
-
Do Netgear repeater login using the admin details.
-
The Status page displays.
-
Locate the Firmware Update option under Maintenance.
-
On the Firmware page, click Check Now.
-
You will be notified whether your repeater is running on the latest version or not.
-
If not, then walk through the on-screen instructions to complete the process.
Final Words
Performing Netgear repeater setup is the ultimate way to turn the luck of the internet dead zones in the house. But, it will be possible only if you follow the correct guidelines to install your WiFi device and take care of its performance following the setup process. We hope that this article has helped you with the repeater’s installation. Thanks for reading the post!
