The need for the internet has become one of the important elements in our daily lives. Users are now able to access the extended WiFi to access blazing-fast internet access in every nook and cranny of their house. And, that is why – Wavlink WiFi extender range extender come into view. After performing Wavlink WiFi extender setup via wifi wavlink com users are now able to make the most out of their internet connection.
But, being a technical device, Wavlink WiFi range extender is also prone to a vast number of technical issues. And, one such issue that 90 percent of users have reported is that they are seeing a red LED on their Wavlink WiFi extender.
Is your Wavlink WiFi extender is also blinking red? If yes, you have stumbled upon the right page. Here, we have prepared a Wavlink extender troubleshooting guide, especially for you so that you get easily fix the red light issue from the comfort of your home. Hence, keep reading!
Fix Wavlink Extender Red Light Issue
Reboot Your Wavlink Extender
The LED on your Wavlink WiFi extender might be blinking red due to technical glitches. Although the reasons behind getting the technical glitches are unknown, however, you can get rid of them by simply giving your Wavlink extender a fresh start. How? By simply unplugging your Wavlink WiFi extender from its wall plug, waiting for a few minutes, and then, plug it back in again.
As soon as you are done with rebooting your Wavlink WiFi range extender, check it is still flashing red. If yes, then try the next troubleshooting hack in line.
Ensure a Steady Power to Wavlink Extender
If the rebooting process fails to help you to resolve the red light issue, then it seems like your Wavlink device is not getting a steady power supply from its wall outlet. Therefore, you need to check that the power being supplied to your Wavlink extender is continuous and the wall socket in which the extender is plugged in is non-damage.
Pro Tip: If there is too much sudden power outages problem in your area, then install a UPS. Why? Doing so will ensure that a continuous power supply is being provided to the Wavlink device 24×7.
Check Connection between Your Devices
Another important reason why you are getting “Wavlink WiFi extender red light” issue might be an unstable Ethernet connection between your Wavlink WiFi extender and your host router. On the off chance, you have connected your devices in a wireless manner, make sure that they (Wavlink extender and router) are kept within range of each other.
On the other hand, if you have used an Ethernet source, make sure that the cable is free of damages and connected properly in the correct ports of your Wavlink device and host router.
Update Wavlink Firmware
Your Wavlink extender may force to flash red color LED if the firmware on it has become outdated. In such a case, you need to update the firmware of your Wavlink WiFi extender right away.
If you want to complete the Wavlink firmware update process without any hassle, we suggest you:
-
Do not interrupt the process by clicking on any link or disconnecting it from your host router
-
Avoid truing off your Wavlink extender. Take it as one of the most beneficial and effective tips.
-
Do not refresh the current web page (firmware update page) or hit the back button
Perform Wavlink Extender Setup Again
Have you tried all the above-mentioned steps to resolve the red light issue with your Wavlink WiFi extender but gone waste? Well, it seems like you have not performed Wavlink WiFi extender setup in a correct manner. Therefore, to rectify your mistake, you need to reconfigure your Wavlink extender. But, prior to initiating the configuration process, you need to reset your Wavlink extender. How? Just press and hold the reset hole on your Wavlink device, and release it after a couple of seconds.
After you are done resetting your Wavlink extender, you are all set to configure it again either using the manual method or the WPS method.
To Conclude
Facing “Wavlink WiFi extender red light” issue is quite common. But, with the help of the troubleshooting hacks listed above, you can fix the issue in the blink of an eye. Hence, we hope that you find this piece of writing pretty helpful.
