In this post we had describe How To Install A Pot Filler In An Existing Wall.Installing a pot filler in your kitchen is not only stylish but also useful. Installing one for stoves like the radiant electric ranges can be easy with our simple guide.
Here are some steps you should take before starting: -Find out how much space there will be aboveyour stovetop, then measure from one side to another across that distance (you’ll need this info later when choosing,The right faucet).Look into single valve versus Two Way Valves? What kind of plumbing hook up do I have access toof course depending on whetheror notwe’re talkingabouta new installation ,but ifit’s just adding.
So, let’s dive in…
Step 1: The first move is making a plan. You can find a lot of instruction videos on the internet, they may show you steps, but when you’re working on your own. You have to make a plan for yourself. Write your plan down if needed.
Step 2: Get your water line to the location you want to mount the faucet at. Get down and find out your water supply line. This is more of a plumbing process. So, if you’re afraid, get the help of an plumbing professional services. But if you choose to do it, then you have to use a hose or a pipe.
Bring the waterline up to the wall. Drill a hole where your pot filler is going to come out. You can choose whether you’re setting it in the middle of the stove or on the side. It’s up to you.
Step 3: Attach a threaded pipe to your water line hose or pipe. The maximum size of this pipe is 2 and a half-inch. When attaching use sealant paste to make sure there isn’t any leak.
Step 4: Install the mounting plate. Take the mounting plate and mark where you need to put in the screws. Drill holes according to the measurement of the screws.
After that, place the mounting plate along with the mounting gasket and tighten the screws.
Step 5: Now, set up the pot filler. Attach it with the threaded pipe that you installed. To keep your thread leak-free and durable, use sealant paste. Don’t over tighten the pot filler. This will damage the thread. Use your common sense and make sure where the end of the thread is.
Don’t put extra pressure. It’ll damage the thread and this will cause leaks and drips.
Step 6: Build your drywall and make everything look good when you’re totally done with everything. Enjoy your pot filler.
Cautions:
- Shut off the water line before start working.
- If you’re plumbing, then don’t forget to shut off the electric line.
- Use one valve pot filler if you’re installing it yourself.
- Make sure the water supply line is filtered as you’ll be using it for cooking.
- When tightening threads, don’t put extra pressure.
- Keep it high if you use larger pots for cooking.
Conclusion
So, this how you can install a pot filler in an existing wall. In this short guide, we tried to share the steps of installing a wall mounting faucet. We covered the main things of the faucet installation. If you have any questions or queries, feel free to leave a comment.
Read Also
